Over the years, there has been a growing demand for asbestos removal in Sydney. Both residential and corporate clients require such service as a vital part of a construction process. While the service is popular, it is apparent that only a small fraction of the entire clientele knows the exact procedures that are done. There are clients who believe that they should no longer know how it is done, and all that is important for them is to hire the right contractor for the job. Nonetheless, even if you are working with the best contractor in New South Wales, there is still a need for you to be knowledgeable on how the removal is supposed to take place.
The Procedure for Asbestos Removal Sydney
The first thing that is done when it comes to asbestos abatement is to contain the area where work will be done. The site needs to be sealed as a way of protection. The area should be thoroughly sealed to be assured that asbestos fibres will not escape. Make sure as well that all of the tools that will be required are present in the area. In this step, the three-stage HEPA negative air machine should have been already positioned as well.
Next, those who will perform the removal of asbestos should make sure that the right personal protective equipment is worn. There will be a need for protective suit and respirator. These things will ensure the highest level of protection for the worker, especially considering the fact that the surrounding area will prove to be hazardous.
Before the commencement of the process, there is also a need to make sure that the entrance and exit to the work area will be closed. This will provide the assurance that only authorized workers with proper protective equipment will be exposed on the site where the job is going to be done.
After which, the three-stage HEPA negative air machine will be switched on. It is important to make sure that the air ducts are directed outside and not within the area of the work.
The next step is to place the materials that have been removed in an enclosed container. The removed material should be also sprayed by water, which is done with the use of a surfactant. Once all sides are wet, it is going to be sealed again in another container that is approved by the relevant authorities. Once the asbestos that has been removed is sealed, clean the area where the work has been done. Wet rags and vacuum cleaners can be used in order to remove the traces of dirt that have been left behind. The rags, like the material that contain asbestos, should be also disposed accordingly. The protective suit that has been worn should be also thrown. Given the hazardous properties that are found in asbestos, all tools that have been in contact with the said material should be disposed in a proper manner to avoid danger to others, or to the environment in general.
From the discussions that have been made above, one might think that the process of asbestos removal in Sydney is an easy one. After all, there are just few simple steps that one needs to follow in order to bring the job into completion. Nonetheless, it is not as easy as it sounds. In fact, it is not recommended that its removal is done on one’s own, in the absence of professional knowledge and guidance. DIY enthusiasts might think that they can accomplish the process without having to contract the services of professional companies. This, however, is not recommended as the material is hazardous and the general procedure would require the need to be meticulous.
The best thing that one can do is to look for the best asbestos removal company in Sydney. There are many companies in New South Wales or in Australia in general, promising to be the best when it comes to this line of work. Clients, on the other hand, should not fall to the marketing traps of companies. It is paramount to observe the highest level of care in the evaluation of the possibilities to avoid making the wrong decision.
We Serve The Following Areas: