Asbestos Removal Sydney: Different Methods of Removal

Asbestos removal Sydney is a procedure that requires the use of the right equipment, specifically those that can offer the highest level of protection for the asbestos removal expert and for all people who will be directly exposed to asbestos. More so, there is also a need to have extensive knowledge on how it can be done to have the guarantee of achieving successful outcomes. The goal is to reduce the asbestos fibres that are present and this will be possible through the use of the right technique. Generally speaking, there are three approaches that can be utilized for asbestos removal: wet spray method, soaking method, and dry method.

Asbestos Removal Sydney: Wet Method

Also known as the wet spray method, this is the most common technique that is preferred when it comes to asbestos removal. Under this, the most important piece of equipment that will be needed would be a water spray, which will use constant and low pressure for the suppression of asbestos fibres that are found on the surface. In areas where there is no water supply that is available, the company doing the removal can supply a pressurised vessel. If the extent of the removal that will be done is going to be minimal, a small spray bottle can prove to be sufficient.

In order to successfully complete this procedure, a wetting agent will also be required, which is usually a detergent. This will result into wetting the asbestos faster as against to how it will be with water alone.

This method will also necessitate the need for vacuuming. This should be done before the surface is sprayed with water. Consequently, the vacuum cleaner should also be used to accumulate dust within the work area, making sure that it will not spread into other places.

While this is the favoured method for asbestos removal, it is important to note that there are risks of electrical shock that are involved because a wetting agent will be used. It is vital to work far from sources of electricity or to turn off electricity distribution systems to ensure the safety of the removalists.

Asbestos Removal Sydney: Soaking Method

If the asbestos is too thick, the ordinary water spray method may not prove to be sufficient. In such instance, the soaking method can be an excellent choice for asbestos removal Sydney. Through the latter, water or water-based solution will be injected on the asbestos. This is going to be a complicated procedure, which is why specialised training and high-level expertise will be necessary.

The thickness of the surface may make it hard for the injection with the wetting agent to pass through. Therefore, to make asbestos removal easier, holes can also be drilled throughout the surface where the injection will pass.

Like in the case of other methods, once asbestos is removed from the surface, it should be transferred in a sealed container. It should also be labelled appropriately so that it will not mix with other wastes.

Asbestos Removal Sydney: Dry Method

Although this is another technique that can be executed for asbestos removal, it should be noted that this is the least preferred among the three. One of the main reasons on why it is not chosen is because it leads into a higher likelihood that asbestos fibres will get mixed with the air, and hence, posing serious health risks. This can only be used in situations wherein it is really necessary, such as when there is an electrical equipment that cannot be removed.

There are different control methods that should be performed, including the use of enclosure when removing non-friable asbestos. The work area should be covered properly to avoid the danger of airborne asbestos. Plastic sheeting will also be necessary, as well as air-line respirators for removing friable asbestos. At all times, wet containers should be present to suppress the asbestos. Lastly, the removalist should also pay attention to the proper disposal of asbestos waste.

READ: Cost of Asbestos Removal


Absolute Environmental Services
38 Thorn St Pennant Hills, NSW, 2120,Australia
0425 257 142, (02) 9484 7313

Comments are closed.